Schimmel-Hex destroys all previous experience and knowledge in the field of mold removal.
Schimmel-Hex is proven to remove mold from silicone and tile joints - Removes 99.9% of mold stains and mold fungi
and reliably kills bacteria. No need to cut out the joints or re-seal.
Scope:
All silicone and tile joints in shower cubicles, tiles, fittings, windows, etc.
On walls with plaster and wallpaper.
Application:
Before use, please unscrew the transport cap and replace it with the spray cap.
Place a 2 cm folded strip of kitchen roll (paper towel) or similar material on the affected areas and soak it with Anti-Mould Hex. Then press the paper against the silicone sealant to adhere firmly. Leave this damp strip of kitchen roll on the silicone sealant overnight.
The next morning, remove the paper and rinse the silicone sealant with water.
TIP: For very stubborn mold, place an additional strip of cling film on top of the paper strip.
For mortar joints or plaster, or on wallpaper, simply fold a piece of kitchen roll, spray it until dripping wet, apply it to the affected areas, and leave it on overnight. For absorbent surfaces, Schimmel-Hex can also be applied with a brush until the surface is damp.
Because Schimmel-Hex penetrates up to 2 cm deep, it kills the mold spores directly on the masonry and in the plaster. You'll be mold-free afterward.
When processing, open windows and wear protective gloves.
Hazard warnings:
EUH206 Warning! Do not use with other products, as dangerous gases (chlorine) may be released.
H314 Causes severe skin burns and eye damage.
H290 May be corrosive to metals.
H400 Very toxic to aquatic life.
Danger
Ingredients according to 648/2004/EC Detergents Regulation:
< 10% chlorine-based bleach, per 100g concentrate: 7.5g sodium hypochlorite.
Other ingredients: < 0.1% sodium hydroxide (stabilizer), liquid concentrate.
http://ec.europa.eu/growth/sectors/cosmetics
Use biocidal products carefully. Always read the label and product information before use.